OUTLINECONVERT - FREE ORIGINAL PRACTICE KIT

Start here: https://outlineconvert.com/guides/pdf-pattern-page-to-svg
No account, checkout or purchase is needed for these example files.

FILES
rounded-tag-practice.pdf: instructions on page 1, vector drawing on page 2.
rounded-tag-4inch.svg: 4-inch drawing on the original full-page canvas.
rounded-tag-4inch-tight.svg: the same drawing with less blank canvas.
rounded-tag-4inch.dxf: the same outlines, in millimeters.

CHECK THE DRAWING AFTER IMPORT
1. Open a format that your design software supports. An accepted file
   extension alone does not prove that every outline imported correctly.
2. Inspect the rounded outer shape and the small circular hole.
3. Select both outlines together. Check the drawing bounds:
   width 101.60 mm (4 inches), height 50.80 mm (2 inches).
   The hole diameter is approximately 8.128 mm.
4. Compare the two SVG versions. The drawing is unchanged. The tight SVG
   canvas is 101.80 x 51.00 mm, including a 0.1 mm display-stroke edge.
   The larger full-page canvas is about 213.36 x 301.75 mm.
   Measure the drawing, not the canvas or the visible stroke thickness.
5. If the imported size differs, check that app's import-unit settings
   and measure again. Do not assume a width entered on a website proves
   the size after import into another application.

WHAT THESE FILES DO NOT PROVE
This is original artwork for file testing, not a tested cutting plan.
No cutter software or physical cutting compatibility is certified.
SVG retains cubic curves. DXF uses line segments within the converter's
0.02 mm approximation tolerance. Exports contain outlines, not machine
settings. Colors, fills, line weights and dash styles are not preserved.
You may use or adapt this original example artwork for testing.

YOUR OWN PDF
Preview your own compatible PDF free at https://outlineconvert.com/print-file-rescue
SVG and DXF exports cost $5 once per selected page. No subscription.
Input: a PDF up to 5 MB with plain vector outlines on the selected page.
Photos, scans, text, clipping, annotations and effects are unsupported.
The tool does not trace photos, scans or text.

Written support: printfilerescue.support@gmail.com
